To access the container, pull the bottom rack out and remove the protective cap of the salt container. Pour in the salt until it reaches the top of the container, then close the cap. Dishwasher salt containers contain water, and this water may overflow when you fill the container with salt. Salt may also spill inside the appliance while May 12, 2011 · 12 May 2011. #1. We have just bought a brand new dishwasher - BEKO DWD4311 - it worked OK for a couple of weeks but now it is mysteriously filling with water when not in use. We purchased a new washing machine at same time - shares the same outlet and that is working fine. We don't think that is water coming back in after a wash as its all good Make sure to use rinse aid. Your dishwasher may have run out of rinse aid or there may be a problem with its release into the appliance. Rinse aid disperses water from the surface of your dishes during the final rinse and helps with the drying process. It prevents water droplets from drying on your dishes and leaving water marks. Feb 22, 2020 · Then, turn that valve OFF and see if the leak is still there or not. If it will stop leaking, then just replace water hose from the valve to the dishwasher. If you found water inside the dishwasher in the sump and then eventually it leaks on the floor, REPLACE water inlet valve in the dishwasher (not shut-off vavle) Reply If the water supply is turned on and the hose pipe is not kinked the problem may be due to a faulty inlet valve. Check the inlet valve with a multimeter to confirm continuity - typically 2000 to 4000 Ohms. (See here for instruction on how to use a multimeter) Make sure the drain hose is installed properly. If your appliance cannot drain itself, it won’t take in water. Check the position of the drain hose connected to your dishwasher. Make sure that it’s connected to the waste outlet at least 50 cm and at most 100 cm above the ground. The water supply and drain hoses shouldn’t be bent or clogged. E0TSDjB.

beko dishwasher not filling with water